大恒仪器股份有限公司

本機系用來測試黏扣帶（魔術貼）在經過若幹次的黏貼及剝離動作後，是否仍具有緊密黏扣的性質。測試時，先以機台做一定次數的黏貼及剝離動作，然後取下試件，截成75×20mm的尺寸，並以展壓輪均勻滾動試件，再得用拉力機求其黏貼力興黏貼強度。
■This tester is used to measure if Velcro is still swath some bonding capability after some cycles of fasten and peel .First of all ,use this tester to fasten and peel specimen to the size of 75×20mm .Roll over specimen to made it stick closely by a compressed roller .then use a tensile testing machine to measure its adhesive force and peeling adhesive force anted peeling adhesion strength.

滾輪寬度Width of roller	value="70" UnitName="mm">70mm
滾輪直徑Diameter of roller	上Upper Ø62.5mm 下Lower Ø60mm
測試速度Test speed	60rpm
荷重Load	5kgs
計數器Counter	6位元數LCD數位顯示6-digit LCD display
電源power	1Ø,220V,50/60Hz,value="3" UnitName="a">3A
材積Dimension(W×D×H)	約about75×50×70cm
重量Weight	約about60kg